Flow Sensor Ifm SD2000

IFM CATEGORIES

Flow Sensor SD2000

Brand: Ifm
Product Code: SDR21DGXFPKG/US-100

Accurate monitoring of flow, consumption, and medium temperature value
Excellent precision, reproducibility, and measurement responsiveness
For the detection of pressurized air in industrial applications
Featuring switching output, analog output, and pulse output
Easily readable numerical display

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Count of digital outputs: 2; Count of analog outputs: 1

Measuring span

0.3...95.2 m/s

3...700 m³/h

0.04...11.66 m³/min

Connection for process

screw connection R 2 outdoor thread DN50

Application

for commercial applications

Media

pressurized air

Comment on medium

air quality according to ISO 8573-1

class 141

class 344

Intermediate temperature value[°C]

0...60

Pressure classification

16 bar

1.6 MPa

Response duration[s]

0.1; (dAP = 0)

Damping process parameter dAP in increments[s]

0 - 0,2 - 0,4 - 0,6 - 0,8 - 1

Software / programming

Configuration options

Flow supervision; volume meter; preset counter; temperature value oversight; hysteresis / window; typically open / closed; current/pulse output; display can be adjusted and turned off; display unit; cumulative counter

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9 CDV

Configurations

without profile

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

4.1

Supported DeviceIDs

Mode of operation	DeviceID
default	270

Measuring span

0.3...95.2 m/s

3...700 m³/h

0.04...11.66 m³/min

Show range

0...114.2 m/s

0...840 m³/h

0...13.99 m³/min

Setpoint SP

0.7...95.2 m/s

5...700 m³/h

0.09...11.66 m³/min

Reset threshold rP

0.3...94.8 m/s

2...697 m³/h

0.04...11.61 m³/min

Analog initiation point ASP

0...71.4 m/s

0...525 m³/h

0...8.75 m³/min

Analog endpoint AEP

23.8...95.2 m/s

175...700 m³/h

2.91...11.66 m³/min

In increments of

0.1 m/s

1 m³/h

0.01 m³/min

Inputs / outputs

Total count of inputs and outputs	Count of digital outputs: 2; Count of analog outputs: 1
Voltage for operation[V]	18...30 DC; (to SELV/PELV)
Current draw[mA]	< 110
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	1
Overall count of outputs	2
Output response	output signal; analog output; pulse signal; IO-Link; (customizable)
Electrical engineering design	PNP
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2
Continuous current rating of the switching output DC[mA]	250; (per output)
Total analog outputs	1
Analog current output[mA]	4...20; (expandable)
Max. capacity[O]	500
Pulse output signal	consumption measurement device
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Reproducibility[% of the assessed value]	± 1,5
Precision (within the measurement range)	± (3 % MW + 0,3 % MEW) / ± (6 % MW + 0,6 % MEW); (class 141 /; class 344; conditions: installation to DIN ISO 2533; installation in pipes: DN50)
Surrounding temperature value[°C]	0...60
Temperature for storage[°C]	-20...85
Max. relative humidity of air[%]	90
Safety feature	IP 65