Level Sensor Ifm LMT102
IFM CATEGORIES
Level Sensor LMT102
Brand: Ifm
Product Code: LMCCE-A12E-QSKG-2/US
- For dependable level management in tanks and containers
- Sanitary design tailored for the demands of the food and beverage sector
- Applicable for liquid and viscous substances as well as bulk materials
- Media differentiation through the configuration of the switching outputs
- Dependable elimination of deposits or foam
Contact via Zalo
Phone call
Product characteristics
| Total count of inputs and outputs | Quantity of digital outputs: 2 | ||||
| default configuration | aqueous media | ||||
| Connection for process | screw connection G 1/2 with sealing cone | ||||
| System | gold-plated terminals | ||||
| Media | Fluids; thick substances; powders | ||||
| Suggested media | water; aqueous media; oils; oil-based fluids; powder | ||||
| Not suitable for | Refer to the operating manual, section "Operation and features" | ||||
| Length of probe[mm] | 38 | ||||
| Pressure in the tank |
| ||||
| communication interface | IO-Link | ||||
| Mode of transmission | COM2 (38,4 kBaud) | ||||
| IO-Link version | 1.1 | ||||
| SDCI specification | IEC 61131-9 | ||||
| Configurations | Intelligent Sensor: Data Process Variable; Device Identification | ||||
| SIO mode | yes | ||||
| Necessary master port category | A | ||||
| Analog data process | 1 | ||||
| Data binary process | 2 | ||||
| Minimum process cycle duration[ms] | 2.3 | ||||
| Supported DeviceIDs |
| ||||
| Display |
|
Operating conditions
| Surrounding temperature value[°C] | -20...85 | |||
| Comment on operating temperature value range |
| |||
| Temperature for storage[°C] | -40...85 | |||
| Safety feature | IP 68; IP 69K | |||
| default configuration | aqueous media |
Inputs / outputs
| Total count of inputs and outputs | Quantity of digital outputs: 2 |
| Voltage for operation[V] | 18...30 DC |
| Current draw[mA] | < 50 |
| Safety feature rating | III |
| Reverse polarity safeguard | yes |
| Measuring method | capacitive |
| Overall count of outputs | 2 |
| Output response | output signal; IO-Link |
| Electrical engineering design | PNP/NPN |
| Count of digital outputs | 2 |
| Output feature | typically open / closed; (customizable) |
| Max. voltage drop at switching output DC[V] | 2.5 |
| Continuous current rating of the switching output DC[mA] | 100 |
| Overcurrent protection | yes |
| Method of overcurrent protection | yes (momentary) |
| Overcurrent protection | yes |
| Response duration[s] | < 0.5 |
| Weight[g] | 202 |
| measurements[mm] | Ø 30 / L = 125 |
| Substance | stainless steel (1.4404 / 316L); PEEK; PEI; FKM |
| Substances (contacted components) | PEEK; surface properties: Ra < 0.8 / Rz 4 |
| Connection for process | screw connection G 1/2 with sealing cone |
Download Specification for LMT102
Download PDFRELATED PRODUCTS
Level Sensor LW2720
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
NON-CONTACT LEVEL TRANSMITTER
Level Sensor LMT01A
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
LMACE-A12E-QSKG-1/US/3D/3G