Pressure Sensor Ifm PY9060

IFM CATEGORIES

Pressure Sensor PY9060

Brand: Ifm
Product Code: PN-600-SE MFRKG/US/ /

Ideal for application in homogenization processes
Configurable switching output featuring IO-Link along with a expandable analog output
Red/green indicator for easy recognition of the acceptable range
The process connection is adjustable for optimal alignment

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Count of digital outputs: 2; Count of analog outputs: 1

Measuring span

0...600 bar

0...8700 psi

0...60 MPa

Connection for process

homogenizer interface

System

gold-plated terminals

Sensing element

diaphragm seal

Application

recessed installation compatible for the food and drink sector

Media

fluids and gases

Intermediate temperature value[°C]

5...125; (150 maximum 1h)

Minimum force per unit area before bursting

1200 bar

17400 psi

120 MPa

Pressure classification

800 bar

11580 psi

80 MPa

Vacuum strength

-1000 mbar

-0.1 MPa

Kind of force per unit area

relative force per unit area

Response duration[ms]

< 1.5

Programmable delay time dS, dr[s]

0...50

Damping process parameter dAP[s]

0...4

Damping for the analog output dAA[s]

0...4

Max. response duration for analog output[ms]

Software / programming

Configuration options

hysteresis / threshold; typically open / default closed; activation/deactivation delay; damping; display module; current/voltage output

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

2.3

Supported DeviceIDs

Mode of operation	DeviceID
default	458

Measuring span

0...600 bar

0...8700 psi

0...60 MPa

Setpoint SP

4...600 bar

60...8700 psi

0.4...60 MPa

Reset threshold rP

1...597 bar

20...8660 psi

0.1...59.7 MPa

Analog initiation point

0...480 bar

0...6960 psi

0...48 MPa

Analog endpoint

120...600 bar

1740...8700 psi

12...60 MPa

In increments of

1 bar

20 psi

0.1 MPa

Inputs / outputs

Total count of inputs and outputs	Count of digital outputs: 2; Count of analog outputs: 1
Voltage for operation[V]	18...30 DC; (to SELV/PELV)
Current draw[mA]	< 35
Minimum insulation resistance[MO]	100; (500 V DC)
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	0.3
Built-in watchdog	yes
Overall count of outputs	2
Output response	output signal; analog output; IO-Link; (customizable)
Electrical engineering design	PNP/NPN
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2
Continuous current rating of the switching output DC[mA]	250
DC switching frequency[Hz]	< 500
Total analog outputs	1
Analog current output[mA]	4...20; (adjustable 1:5)
Max. capacity[O]	500
Analog voltage output[V]	0...10; (expandable 1:5)
Minimum load resistance[O]	2000
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Precision of switch points/span>[% of the span]	< ± 0,4; (Turn down 1:1)
Reproducibility[% of the span]	< ± 0,1; (with temperature value fluctuations < 10 K; Turn down 1:1)
Characteristics variation[% of the span]	< ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)
Hysteresis variation[% of the span]	< ± 0,1; (Turn down 1:1)
Extended stability[% of the span]	< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient value for the zero reference[% of the span / 10 K]	0,2; (5...80 °C)
Temperature coefficient value for the range[% of the span / 10 K]	0,2; (5...80 °C)
Surrounding temperature value[°C]	5...80
Temperature for storage[°C]	-40...100
Safety feature	IP 67