Capacitive Sensor Ifm KQ1000

IFM CATEGORIES

Capacitive Sensor KQ1000

Brand: Ifm
Product Code: KQ-5xxxNFPKG/IO

Ongoing level monitoring through non-metal and non-conductive surfaces
Non-contact sensing eliminates any impact from the medium
Three individual point level sensors integrated into a single unit

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Electrical engineering design	PNP/NPN; (customizable)
communication interface	IO-Link
measurements[mm]	250 x 28 x 16.7
Application	Ongoing level monitoring through non-metal and non-conductive surfaces
Media	powdered materials; liquid solutions; petroleum products
Not suitable for	highly adhesive substances
Reproducibility[% of the final value]	2
Offset variation[% of the final value]	4
Definition of detail level[% of the final value]	1
Linearity variation[% of the final value]	1

Reaction times

Response duration[ms]

1300

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Digital Measurement Sensor Profile, Standard Profile

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

9.6

IO-Link cyclic process data

Operation	bit length
measured value	16
exponential factor	8
device status	4
two-state switching data	3

IO-Link acyclical functions

installation orientation; restriction of sensor components; Sensitivity; minimum detection threshold; Fault tolerance performance; error timeout; Damping; LED status; activation cycle counter; runtime counter; switching cycles tally; min./max. measured value; internal temperature value; min./max. internal temperature value; diagnostic data level

Supported DeviceIDs

Mode of operation	DeviceID
default	924

Note

For additional details, please refer to the IODD PDF document in the "Downloads" section

Measuring span[mm]

< 200

Inputs / outputs

Total count of inputs and outputs	Total digital outputs: 3
Voltage for operation[V]	10...30 DC; (IO-Link: 18...30 DC)
Current draw[mA]	< 50
Safety feature rating	III
Reverse polarity safeguard	yes
Max. power-up delay duration[ms]	1300
Measuring method	capacitive
Electrical engineering design	PNP/NPN; (customizable)
Count of digital outputs	3
Continuous current rating of the switching output DC[mA]	200
Max. resistance for switching output[O]	8
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Detection interval[mm]	228
Setpoint SP[%]	5...95
Reset threshold rP[%]	4...94
In increments of[%]	1
Use cases	DIN EN 60654-1 application category B2
Surrounding temperature value[°C]	-20...80
Temperature for storage[°C]	-25...85
Safety feature	IP 65